RBSC100 100A continuous at 14/28V DC


  • A compact, lightweight and highly portable power unit. Designed to give continuous high quality DC power for crew training, aircraft servicing in workshops, on the ramp or in the field. This continuous high power model is ideal for diagnostic work, pre flight checks, charging the on board battery or for continuous powering of equipment during operations, without draining the onboard aircraft batteries.

    Volts DC14.4 / 28.8
    Continuous Amps100
    Weight8.6 kg (UK Only)

    A compact, lightweight and highly portable power unit. Designed to give continuous high quality DC power for crew training, aircraft servicing in workshops, on the ramp or in the field. This continuous high power model is ideal for diagnostic work, pre flight checks, charging the on board battery or for continuous powering of equipment during operations, without draining the onboard aircraft batteries.

    There is a range of built in safety features and the units are simple to use. As standard the units will produce a steady 14.4 or 28.8 Volts up to the fully rated output current with power factor correction.

    The power supplies are multi fan cooled with inbuilt thermal management for operation up to 50°C ambient environments. The safety features include; Internal AC Residual Current Protection, Overload and Short Circuit protection. The power modules conform to EMC standards for noise emissions and immunity. Delivered as standard this unit is supplied with a 2m heavy duty lead, fitted with a 3 pin NATO connector for direct aircraft connection, but extra extension and alternative format connections are available.

    These units can be fitted with a Charge Management System that allows the user to charge their customers for the power used whilst an aircraft is connected to a Red Box RBC6000 frequency converter, RBC5000 transformer rectifier unit or and RBSC DC Power Supply. The system is an ideal platform for airport operators who want to pass on the cost of supplying ground power to aircraft on turnaround. Please contact our sales team for more information.

    Features

    • Direct connection to aircraft or land vehicle.
    • Aircraft cable available from 2m to 6 m.
    • Rugged lightweight Aluminium case.
    • RCD safety protection.
    • Digital display with backlite -Volts / Amps / Input Status.
    • System status on display with input voltage or errors.
    • Multi fan cooled – Temperature controlled.
    • Both input and output cables removable for easy stowage.
    • Supplied with input cable to required length.
    • Several options of output cable length and connections.
    • User switchable between 14V and 28V.

    Digital Display

    Safety and EMC

    • Emissions EN55032 Class A, EN61000-3-2
    • Immunity EN61000-4-2, EN61000-4-3
    • Safety IEC62368-1 (2014)

    Protection

    • Output Overload
    • Over Voltage / Current Limit
    • Short Circuit
    • 30mA RCD
    • Advanced energy saving thermal fans

    Specification

    Output Current100Amps at above 180 VAC supply
    Auto reduction to 60Amps Below 180 VAC
    Output Voltage14.4 or 28.8 Volts
    Auto 2 Stage – Pro Mode, Trimmable from 27.6 to 30 VDC
    Output QualityAccuracy ± 0.15 Volts – Ripple less than ± 150mV
    AC Input Supply95 to 264 VAC
    AC Input Frequency47 to 63Hz
    Phase
    Power Factor0.98/0.95
    Input Rating3000 VA
    Operating Temp-20 to 50⁰C
    IP Rating55* For use on level ground
    Dimension (mm)450 x 195 x 230 with integral handle
    Weight8.6Kg (Unit only)

    Plug Selector

    UK(220VAC) 16 Amp standard – Can be reduced to 13 Amp for UK Plug (at 13A output is reduced to 80A
    USA(115VAC) 15A NEMA 5-15 (60Amp) or (220VAC) 15A NEMA 6-15 (100 Amp)
    Other CountriesPlease state country when ordering

English English Turkish Turkish